Samsung 275TPLUS - Manual (Page 51)

Safety
Screen
- The Screen Scroll function scrolls the screen for the specified period of
time.
- This function is not available when the power is turned off.
MENU → , → → , → → , →
1) Safety Screen
: Determines whether to turn the Screen Scroll function Off or On.
2) Interval
: Determines the time interval to run the Screen Scroll operation.
(1~10 Hour)
The time is calculated on the basis of the power on time.
3) Second
: Determines the time period to run the Screen Scroll operation.
(10~50 Second)
4) Type
: You can change the Safety Screen Type.
(Pixel, Bar, Eraser)
Safety
Screen
Interval
Second
Type
Audio Power
When your PC is in Power Saving mode, and this function is turned 'On',
power is supplied to the 'AUDIO POWER' terminal of the external
speaker on the back of your monitor. If this function is turned 'Off', power
is not supplied to that terminal.
MENU → , → → , → → , →
LED
Brightness
Adjusts the brightness of the Power LED.
The higher the level, the brighter the Power LED.
If you set a brightness level, the LED blinks and is saved after one
second.
MENU → , → → , → → , →
Reset
Picture parameters are replaced with the factory default values.
MENU → , → → , → → , → → , →
1) Image Reset
: Image parameters are replaced with the factory default
values.
- Available in PC mode only
2) Color Reset
: Color parameters are replaced with the factory default
values.
- Available in PC/DVI(PC) Mode Only
- Not available in MagicBright™ mode of Dynamic CR.
Image
Reset
Color
Reset