Sebo ET-H User Manual
Page 7
Page 7
The Brush Pressure Adjustment Feature -
Figure 4
The brushing pressure that your ET-H power head applies to
your carpet is adjustable from SOFT through HARD. When the
brush is set on SOFT, the brush pressure is decreased for a
lighter brushing action. For thorough, deep brushing, set the
pressure adjustment to HARD.
The brush pressure adjustment dial is located on the top side
of the power head (# 2, figure 4). To adjust the dial to SOFT,
spin the dial in the direction of the arrow (#8, figure 4). To adjust
the brush action to HARD, turn the dial in the opposite direction
of the arrow (#8, figure 4).
Figure 4
Indicator Lights -
Figure 5
The green and amber indicator lights are located on the top of
the power head (# 5, figure 5).
Green Light:
Motor is on, power head is ready
for operation. The green light
remains illuminated when the
handle is in the upright locked
position and when it is lowered to
its operating position. However,
the green light will shut off when
the power control slider located on
the handle is in the OFF position.
Amber Light Flashing:
Motor is on, brush is adjusting
to carpet pile.
Green and Amber Lights:
Motor shuts down, brush stops
spinning - indicates a shut down
due to overload, clog or jammed
brush roller.
2
5
8
Figure 5