SIIG 104-0487A - Manual (Page 4)

4
3. Insert the driver CD, select Install the software
automatically (Recommended), click Next, then
click Next again.
4. Click Finish then restart Windows to complete the
driver installation.
Windows Vista TM (32-/64-bit)
1. Install the ExpressCard into an ExpressCard slot.
2. At the Found New Hardware window, click Locate
and install driver software (recommended), click
Continue.
3. At the next window, insert the driver CD andVista
will automatically detect and install the correct
driver.
4. At the successfull installed window, click Close
then restart Windows to complete the driver
installation.
Windows Server 2008 (32-/64-bit)
1. Install the board and boot up Windows.
2. At the Found New Hardware window, select Locate
and install driver software (Recommended), then
click Don't Search Online.
3. Insert the driver CD and Windows will search the
CD and install the correct driver.
4. At Windows has finished installing the driver
software for this device, click Close to complete the
installation.
To Verify Windows Installation
1. Use Device Manager to verify proper installation.
For Windows 2000 / XP / Server 2003: Right click My
Computer, click Manage, click Device Manager.