Studer Innotec C 1600-12 - Manual (Page 22)

STUDER INNOTEC COMPACT
User manual COMPACT V4.0 E 22
5.5.1 Diagram of the different modes
9
Show an off LED
Show a blinking LED
Show a lighted LED
CHARGER INVERTER
AC OUT AC IN 1
2
7
8
9
All the functions are enabled. This is the
factory setting.
CHARGER INVERTER
AC OUT AC IN
1
2
7
8
9
The inverter is disabled. Only the transfer
switch and the charger will work normally.
CHARGER INVERTER
AC OUT AC IN 1
2
7
8
9
Charger and transfer switch are disabled. the
inverter will work continuously even if there is
a correct AC voltage at the input
CHARGER INVERTER
AC OUT AC IN 1
2
7
8
9
Inverter and charger are both disabled.
Only the transfer switch function is enabled in
input voltage and frequency is OK.
6 Maintenance
Apart from the periodic controls mentioned for the connections, the COMPACT does not need any
maintenance. Keep the appliance clean and from time to time wipe it clean with a damp cloth.
7 EC Compliance
We hereby state that the products described in this user manual meets the following standards:
EN 61000-6-1, EN 61000-6-3, EN 55014, EN 55022, EN 61000-3-2, Dir. 89/336/EEC,
LVD 73/23/EEC
CH-1950 Sion, 31
st of March 2000 STUDER INNOTEC (R. Studer)