Sony LX50 User Manual
Page 6
1-2
9
Hookups
For SLV-LX50 and LX40
A Use this hookup if your TV has stereo jacks
B Use this hookup if your TV doesn’t have stereo jacks
Note
• If you use the Trinitron TV Synchro Play function (see page 34), the A/V connection is
necessary. (If your TV has two or more inputs, connect the audio/video cable to the VIDEO
IN 1 jacks.)
Completing A/V hookup
After you’ve connected your TV and completed antenna or cable hookup, return to
this procedure to complete VCR set up. This will prevent unwanted noise in the RF
channel.
LINE-1 IN
LINE OUT
AUDIO VIDEO
IN
VIDEO
AUDIO
Audio/video cable (not supplied)
TV
VCR
VIDEO
AUDIO
IN
LINE-1 IN
LINE OUT
AUDIO VIDEO
TV
Audio/video cable (not supplied)
VCR
PROG. / VERIF.
AJUSTAR
:
SELECCIONAR
:
OK
MENU
PARA SALIR
:
AJUSTES
OPCIONES
OPCIONES
ESTEREO AUTO.
SELEC. AUTO. ANT.
SINTONIZ. AUDIO
SELC. DE CINTA
NO
SI
AUTO
VEL. AUTO. CINTA
SI
PRÓXIMA
VOLVER
AJUSTAR
:
SELECCIONAR
:
OK
MENU
PARA SALIR
:
1
PÁGINA
Press MENU and select
OPCIONES.
Set SELEC. AUTO. ANT.
to NO and press OK.
For details, see page 62.
,
10
Hookups
Hookup 1
Antenna hookup
Make the following connections if you’re using an antenna (if you don’t have cable
TV).
A Use this hookup if you’re using:
• VHF/UHF antenna (you get channels 2–13 and channels 14 and higher)
• UHF-only antenna (you get channels 14 and higher)
• Separate VHF and UHF antennas
B Use this hookup if you’re using a VHF-only antenna (you get
channels 2–13 only)
If you cannot connect your antenna cable to the VCR directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external
antenna connector (not supplied) so you can connect the cable to the VHF/UHF IN
connector. If you have separate cables for VHF and UHF antennas, you should use a
U/V band mixer (not supplied). For details, see page 68.
IN
OUT
VHF/UHF
or
A
Rear of TV
VHF/UHF
B
VHF
C
VHF
or
Match the type of
connector on your
TV: A, B, or C.
UHF
UHF
VCR
IN
OUT
VHF/UHF
or
A
Rear of TV
VHF/UHF
B
VHF
C
VHF
or
Match the type of
connector on your
TV: A, B, or C.
UHF
UHF
VCR
For connector types
B and C, no UHF
connection is
required.
11
Hookups
Hookup 1 : VCR setup
Before you start…
• Turn on the VCR and the TV.
• Press TV/VIDEO to display the VIDEO indicator in the VCR’s display window.
You have now completed hookup.
1
Set the RF UNIT switch to CH3
or CH4, whichever channel is not
used in your area. If both are
used, set the switch to either
channel. For details, see page 67.
If you made A/V connections
(from page 8), you do not need to
adjust the RF UNIT switch.
2
Change the on-screen display language to English, if desired. For details, see
page 18.
3
Press EASY SET UP on the VCR.
1 The RELOJ menu appears. Select MANUAL
and press OK. Then set the clock. For details,
see page 24.
2 The SINTONIZADOR menu appears. Set
ANTENA/CABLE to ANT and press OK.
For details, see page 26.
3 The AJUSTE AUTO. starts.
CH3
RF UNIT
CH4
EASY SET UP
SIGUIENTE
:
SELECCIONAR
:
OK
AUTO
MANUAL
AJUSTE
RELOJ
EASY SET UP
CANCELAR
:
AJUSTE
SINTONIZADOR
ANTENA / CABLE
CABLE
ANT
SIGUIENTE
:
SELECCIONAR
:
OK
EASY SET UP
CANCELAR
:
AJUSTE
AJUSTE CONCLUIDO
POR FAVOR ESPERE
AJUSTE
SINTONIZADOR
AJUSTE AUTO.
EJECUTANDO
CH 2 4
12
Hookups
Hookup 2
You have no cable box, or a cable box with only a few
scrambled channels
Recommended use
Use this hookup if you do not have a cable box. Also use this hookup if your cable
system scrambles only a few channels.
What you can do with this hookup
• Record any unscrambled channel by selecting the channel on the VCR
What you can’t do
• Record scrambled channels that require a cable box
IN
OUT
VHF/UHF
IN
OUT
Rear of TV
VHF/UHF
VHF
UHF
VCR
Match the
type of
connector on
your TV: A,
B, or C.
For
connector
types B and
C, no UHF
connection
is required.
B
C
or
or
A
VHF
UHF
Wall
Cable box
Connect this cable
directly to your TV
if you don’t have a
cable box.