Simplicity 1691620 - Manual (Page 12)

10
Installation
Figure 10.
A. Push Bar Hitch
C. Hitch Pin
B. Frame Bracket D. Safety Clip
Broadmoor/LT/1600/2600 Series &
Landlord/GT/1700/2700 Series
1. Drive the tractor over the push bar until rear of
push bar is under front hitch.
2. Stop engine, remove key and set parking brake.
3. See Figure 10. Position the push bar hitch (A) into
the tractor frame brackets (B). Secure push bar
with pin (C) and safety clip (D).
Regent/500/2500 Series Only:
1. Drive the tractor over the push bar until the rear of
the push bar is positioned between the side rail
extensions on the front of the hitch.
2. Stop engine, remove key and set parking brake.
3. See Figure 11. Align the mounting holes in the
rear corners of the push bar (A) with the mounting
holes in the hitch (B), and secure the push bar to
the hitch with a clevis pin (C), and spring clip (D) at
each corner.
Figure 11.
A. Push Bar
C. Clevis Pin
B. Hitch D. Spring Clip
(Not shown)
D
A
C
B