Sony MPEG4 Video Recorder - Manual (Page 53)

49
• When the “Clock” icon is gone, the recorder will turn off auto-
matically.
• Press “Power” on the remote controller to turn on the recorder.
• Check out the firmware version and it should differ from the pre-
vious.
• Use the arrow to scroll to the Factory Reset.
• When the Factory Reset is highlighted, press “Enter” on the
remote controller to do the system reset.
• Then, the firmware upgrade is done.
MPEG-4 Video Recorder_UM_EN.book Page 49 Thursday, June 22, 2006 2:14 PM