Text input – Siemens S40 User Manual

Page 11

Advertising
background image

19

wheel mode

The characters available on each

key can be seen in the table below.

Press once to enter the first charac-

ter, twice to enter the second char-

acter, etc.

Press

3 times if you want

to enter a capital letter. To activate

the caps lock function, press

4 times. Press it once again to

deactivate the function.

mode

T9® Text Input is a feature enabling

you to more easily use SMS mes-

saging. The T9 feature allows you to

compose text messages with only

one keypress per letter. See p. 46.

mode

In this mode you can enter only

digits.

Address and phone books

Text input

18

Using the keypad

Each key on your phone’s keypad

contains a number of characters.

The keypad can be operated in 4

ways: Alphanumeric grid and wheel

mode, T9 mode, which is very use-

ful in connection with SMS mes-

sages, plus digit-only mode.

Switching between the different

modes is done by pressing the

side key on the right-hand of the

phone.

Press »CLEAR« briefly to delete

one character.

Press »CLEAR« for one second

to delete the entire text.

grid mode

Press the relevant key for the

intended letter, e.g. B. Now a table

is shown in the display. Press the

key corresponding to the intended

letter (B = 2).

Which characters available on

each key will depend on the key-

pad language you have selected for

your phone (see p. 70). Additional

language specific characters are

accessed by pressing

.

The first letter will always be capi-

talized, which is indicated by the

symbol in the upper right-hand

corner of the display. The second

letter will automatically be lower-

case. Press

if you want to

enter a capital letter again.

The caps lock function is enabled

by pressing

twice. As long

as the caps lock is active, the sym-

bol

will be seen in the upper

right-hand corner of the display.

Press

again to disable the

caps lock function.

Press

if you want to enter

digits. Press the relevant key to

enter the intended digit.

To get punctuation and symbols

press . You

now

have

access

to five different pages, each con-

taining up to 9 symbols. You can

scroll through the pages using the

arrow keys. Press the relevant key

to enter the intended symbol, e.g.

on page one, 7 corresponds to “@”

.

Address and phone books

User guide S40 US 11/01/01 9:29 Side 18

Advertising