Sony Ericsson P908 - Manual (Page 44)

44 Phone
This is the Internet version of the user’s guide. © Print only for private use.
• Press and select Hide my number , if you do not want to
show your phone number to the party you are calling. Select
Show my number , if you want to show it.
If a call is not successfully connected, the P908 can be set to
automatically retry to connect the call. When a retry is
successful, the P908 alerts you with a single ring signal.
To make an emergency call
Enter the emergency number on the keypad and press the Jog
Dial or press
.
Usually, but not always, no SIM card or PIN code is required for
emergency calls and you will be able to make the call as long as
the available network allows and you have coverage from a
GSM network. Check with your local provider to find out if
emergency calls are possible without a SIM card, and which
emergency call numbers are supported.
To make a call using Speed dial
Speed dial is a fast way to call one of your special speed dial
numbers. See ‘Set up speed dial numbers’ on page 51.
1. Select the key corresponding to the number of the speed dial
contact.
The speed dial name is shown above the
key. If a
picture is attached to the speed dial, the picture is also shown.
2. Press .
To make a call using the Call list
1. Select on the standby screen.
2. Press the Jog Dial or .
3. Scroll the list by rotating the Jog Dial and select an entry.
4. Press the Jog Dial or .
To make a call using the Contact list
1. Select on the standby screen.
2. Press the Jog Dial or .
3. Scroll the list by rotating the Jog Dial and select a contact.
4. Scroll by rotating the Jog Dial and select the desired number.
5. Press the Jog Dial or .
For more information, see ‘Contacts’ on page 99.
To make a call using voice control
1. There are three ways to use the voice recognition function.
– Press and hold the Jog Dial.
– Press and hold .
– Say the ‘Magic word’.
– Press the call button on the headset.
When the Magic word function is activated, the
icon
appears in the status bar.