Sharp COLORINKJET AJ-5030 - Manual (Page 84)

Optional Reception Settings
82
3
If the Color Inkjet doesn't respond, or
if the other party first talks to you and
then wants to send a fax, press the
START key on the Color Inkjet.
(Press your START key before the
person faxing presses their START
key.) Hang up.
Note: If you have set the Fax Signal Receive setting to NO, press the
START key on the Color Inkjet to begin reception.
START
Optional Reception Settings
Fax Signal Receive
Your fax will automatically begin reception if you hear a soft fax tone
after answering a call on your fax or an extension phone. If you use a
computer fax modem to send documents on the same line, you must
turn this function off in order to prevent your fax from mistakenly
attempting to receive documents from the computer fax modem.
Follow the steps below to change the setting.
1
Press these keys:
The display will show:
2
Press 1 to turn on the function, or 2 to
turn it off.
FAX SIGNAL RX
1=YES, 2=NO
FUNCTION
4
or
YES NO
1 2
1 6
all.book Page 82 Wednesday, January 31, 2001 4:29 PM