Sony XP-SR320 - Manual (Page 6)

B
Repeat play
→
M
Press PLAY MODE during playback to select repeat play as follows.
: one-track repeat
V
: all-track repeat
V
no repeat play (normal play)
Note
When the unit is set to E•A•S•S-12 or -48 second mode, if PLAY MODE is pressed
at the end of the track to select the other play mode, the unit may not change to
the other mode properly.
PROGRAM PLAY
→
N
Up to 24 tracks can be chosen for program play.
1 Press ENTER/DISP while in standby mode to display “P-01”.
2 Select the desired track by pressing
r and t .
a track number
b program number
3 Press ENTER/DISP within 8 seconds.
If it is not pressed within 8 seconds, the track number changes to 00. Repeat
the procedure from step 2 again.
4 Repeat steps 2 and 3 to program more tracks.
5 Press
e PLAY/PAUSE to start program play.
To stop program play
Press
s STOP/OFF/CHARGE.
To add tracks to the program
Repeat steps 2 and 3 before you proceed to step 5. You can add tracks to the
end of the program.
To erase the program
Press
s STOP/OFF/CHARGE while in standby mode.
To check the programmed tracks
Press ENTER/DISP repeatedly before you proceed to step 5.
The number of each programmed track will be displayed in order of playback.
Note
• The program is also erased when the disc compartment is opened or the auto
power off function turns the power off.
• When 24 tracks are programmed, “P-FULL” appears, and no more tracks may
be added.
• You cannot back to the previous track by holding r pressed during program
play.
• Repeat play and random play can be performed during program play.
N
1
2
1,3
5
STOP/OFF
CHARGE
2
3
ENTER/DISP
ENTER/DISP
PLAY MODE
5
PLAY/PAUSE
XP-SR321/SR320(AU)E 2