Sirius Satellite Radio SC-C1M - Manual (Page 11)

[
Installation
] 11
Alternate Mounting Methods
The mounting plate can be removed allowing the SC-C1 to
be mounted directly to a surface using either double stick
tape, Velcro or other adhesive material. Simply remove the
2 screws on the bottom of the SC-C1 tuner to remove the
bracket as in Figure 3 below. If using adhesive material,
avoid covering the SID label.
Combining with a SiriusConnect Interface device
Some third-party interfaces are designed with the same asymmetrical chassis as the SC-C1.
To connect the units together, simply remove the mounting brackets from each unit, rotate
them 90° and connect as show in Figures 4 and 5 below
Figure 3
Figure 4 Figure 5
SiriusConnect
Interface
SC-C1 Tuner