SVAT Electronics UC1301 - Manual (Page 6)

TROUBLESHOOTING
Please read this user’s manual carefully before using. If you still have diffi-
culties to use the product, consult the following
syndrome, which will help you solve most common problems.
No picture after turning on the TV
1. Check the power supply.
•Ensure that both the transmitter and receiver are properly connected
and set to the same channels.
•Ensure both the transmitter and receiver power indicators illuminate.
2. Ensure the video cable is well connected.
3. Ensure the TV channel is set to "Video".
4. Set the transmitter and receiver to the channel with the clearest signal.
5. Shorten the transmission range/distance between the transmitter and
receiver. Reposition and/or adjust the Teddy Cam.
Unclear picture reception
1. Ensure that both the transmitter and receiver are properly connected
and set to the same channels.
2. Shorten the transmission range/distance between the transmitter and
receiver. Reposition and/or adjust the Teddy Cam. Replace 9V battery
when necessary.
www.svat.com