Sony ZS-SN10L - Manual (Page 27)

Setting Up
27 GB
3
Using the player on batteries
Insert six R20 (size D) batteries (not
supplied) into the battery compartment.
To use the player on batteries,
disconnect the mains lead from the
player.
Replacing batteries
Replace the batteries when the OPR/BATT
indicator dims or when the player stops
operating. Replace all the batteries with new
ones.
Tips
• The backlight of the display lights up when the
player is turned on.
• When you operate the player on the batteries,
you cannot turn on the player with remote.
Listening to a PC, TV,
VCR, portable digital
music player, etc.
You can enjoy the sound from a PC, TV,
VCR, portable digital music player, etc.
through the speakers of this player.
Be sure to turn off the power of each
component before making any connections.
For details, refer to the instruction manual of
the component to be connected.
1
Connect the LINE IN jack to the line
output jack of the portable digital music
player or other components using an
audio connecting cable (not supplied).
* For a PC: use a cable which fills the
connector of your PC.
For a TV or VCR: use a cable with a stereo-
mini plug on one end and two phono plugs
on the other end.
For a portable digital music player: use a
cable with a stereo-mini plug on both ends.
PC, TV, VCR,
portable
digital music
player, etc.
to LINE IN
jack to line
output
jack
Audio
connecting
cable*(not
supplied)
LINE IN LINE
continued