Schumacher XP2260 - Manual (Page 11)

• 8 •
NOTE: To prevent overheating, the compressor has built-in thermal protection
that will turn the compressor off before it overheats. If the compressor shuts
off, wait a few minutes and it will automatically restart when the compressor
cools.
NOTE: The air compressor is rated for 150 PSI.
estimated Time for Inflating
Vehicle Tires 13” to 16” 6 to 24 minutes
bike Tire 1 to 3 minutes
Sports balls 30 seconds
These times are approximate. Use the air compressor gauge to ensure the
proper pressure has been reached. Do not over inflate.
using the Inflator
5.7
Risk of explosion.
Read instructions of the product being inflated before using the
inflator. Avoid over inflation, do not exceed the manufacturer’s
recommended pressures. Do not leave the inflator unattended during
use.
Ensure the battery clips are securely on the storage holders. 1.
Attach the corrugated hose with end adapter to the high-flow inflator outlet 2.
located near the Compressor/Inflator switch on the back of the Instant
Power™.
The main accessory adapter attached to the corrugated hose
3.
accommodates up to 4 sizes. If another size is needed, an additional
adapter can be attached to the end of the main accessory adapter.
Insert the adapter into the product to be inflated.
4.
Push the Compressor/Inflator switch to the INFLATOR position and inflate 5.
the product.
When the product is inflated to the desired level, push the Compressor/
6.
Inflator switch to the OFF position and remove the adapter.
estimated Time for Inflating
24” beach ball 1 to 3 minutes
Pool Raft 4 to 6 minutes
Queen-size Air Mattress 4 to 8 minutes
2 Person boat 8 to 10 minutes
Times are estimates and will vary depending on size and product features.
using the Deflator
5.8
Ensure the battery clips are securely on the storage holders. 1.
Attach the corrugated hose with the end adapter to the high-flow deflator 2.
outlet which is located on the side of the Instant Power™.
The main accessory adapter attached to the corrugated hose
3.
accommodates up to 4 sizes. If another size is needed, an additional
adapter can be attached to the end of the main accessory adapter.
Insert the adapter into the item to be deflated.
4.
Push the Compressor/Inflator switch to the INFLATOR position and deflate 5.
the item.