Sony XR160 - Manual (Page 62)


US
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
Slow flashing
The temperature of your camcorder is getting
higher. Turn off your camcorder and leave it
in a cool place.
Fast flashing
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it in a cool place.
The temperature of your camcorder is low.
Make the camcorder warm.
No memory card is inserted (p. 22).
When the indicator flashes, there is not
enough free space for recording images. Delete
unnecessary images (p. 36), or format the
memory card after storing the images on other
media.
The Image Database File is damaged. Check
the data base file by touching (MENU)
 [Setup]  [ (Media Settings)] 
[Repair Img. DB F.]  the recording medium.
The memory card is damaged. Format the
memory card with your camcorder (p. 57).
Incompatible memory card is inserted (p. 22).

The memory card is write-protected.
Access to the memory card was restricted on
another device.











There is something wrong with the flash.
The amount of light is not sufficient. Use the
flash (HDR-PJ50/PJ50V).
The camcorder is unsteady. Hold the camcorder
steady with both hands. However, note that
the camera-shake warning indicator does not
disappear.
The drop sensor function is activated. You may
not be able to record nor play back images.
The recording media is full. Delete unnecessary
images ( p. 36).
Photos cannot be recorded during processing.
Wait for a while, then record.
When [ REC Mode] is set to [Highest
Quality ] or [60p Quality ], you cannot
capture photos while recording movies.
Furthermore, if [ Frame Rate] is set to [24p]
(HDR-PJ50/PJ50V), you cannot record photos
while the camcorder is in movie recording
standby mode.






