See figure 13 through figure 16, Offset mounting bracket (figure 14) – Siemens 331-2856 User Manual
Page 11
Advertising
POWERS™ Controls No. 6 Pneumatic Damper Actuator
Technical Instructions
Document No. 155-029P25
December 3, 2004
Dimensions
Figure 13. Extended Shaft Remote Mounting with Travel Stops.
Dimensions in Inches (Millimeters).
Offset Mounting
Bracket
This bracket is
designed to offset
Universal Mounting
Plate 331-623 or
331-623A from the
ductwork.
NOTE: Depending on
the application, two
brackets may be
required to support
the actuator and
universal mounting
plate.
Figure 14. Offset Mounting Bracket 333-176.
Dimensions in Inches (Millimeters).
Siemens Building Technologies, Inc.
Page 11
Advertising
This manual is related to the following products: