Sharp TINSE4796FCZZ - Manual (Page 33)

31
SETUP IN A WINDOWS ENVIRONMENT
INSTALLING THE PRINTER DRIVER / PC-FAX
DRIVER
To install the printer driver or the PC-Fax driver, follow the appropriate procedure in this
section depending on whether the machine is connected to a network or connected by
USB cable.
☞
WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE (page 1-90 in
the Operation Guide)
WHEN THE MACHINE IS CONNECTED TO A NETWORK
This section explains how to install the printer driver and the PC-Fax driver when the
machine is connected to a Windows network (TCP/IP network).
• To print to the machine over the Internet using the IPP function when the
machine is installed in a remote location, or to print using the SSL (encrypted
communication) function, see "Printing using the IPP function and the SSL
function" (page 1-88 in the Operation Guide) and install the printer driver or
the PC-Fax driver.
• If the machine is connected to an IPv6-only network
The software cannot be installed by detecting the machine's address from the
installer. After installing the software as explained in "Installation by specifying
the machine's address" (page 1-85 in the Operation Guide), change the port
as explained in "Changing to a Standard TCP/IP Port" (page 1-104 in the
Operation Guide).
• The installation procedure in this section is for both the printer driver and the
PC-Fax driver, although the explanations are centered on the printer driver.
mxc402_us_sta.fm Page 31 Thursday, June 17, 2010 11:20 AM