Operation of your new treadmill – Smooth Fitness 9.6P User Manual

Page 7

Advertising
background image

Operation of Your New Treadmill

DO NOT STAND ON THE WALKING BELT WHILE

LEARNING TO OPERATE YOUR NEW TREADMILL!!!

Basic Treadmill Operation:

Step 1: Press and release DISPLAY ON/FAST key. Display will light.
Step 2: For calorie computation if desired;

(A) Calorie window will display LBS.
(B) Use blue INCLINE keys to enter users weight.

Note: If no weight is entered calories do not calculate and calorie window will not light.

Step 3: For an elapsed (countdown) time press ENTER key. The Time/Pace window

will indicate 20:00 (minutes). Adjust to desired time with blue INCLINE keys.

Note: The above steps 2 & 3 are not required for operation of the treadmill.

Step 4: Adjust to desired speed with FASTs/SLOWt keys.
Step 5: Incline may be adjusted anytime with blue Up + / Down - incline keys.
Step 6: Press START BELT key to begin belt movement. Clock will begin.

Speed / Incline Repeat Feature:

The computer will retain the speed/incline value you’ve just selected as a repeater
feature. This means the next time the unit “wakes”/lights up, your desired start speed/
incline will repeat itself. Anytime, before belt movement is begun, the speed or incline
start value can be changed and held in memory.

Pause Feature:

Step 1: When operating the treadbelt, the pause feature may be utilized by pressing

the red STOP/PAUSE switch. This will slowly decelerate the treadbelt to zero.
TIME and DISTANCE will hold while unit is in the pause mode.

Step 2: To resume previously set speed, press START BELT key. Unit will slowly

return to the speed displayed.

Pace Feature:

o Pace is the amount of time that it will take to walk or jog a mile. Press SELECT key

after treadbelt movement for pace function. Press SELECT key again to exit pace
mode. Pace will scan with Time/Calorie and adjust up or down as speed is
changed.

6

Smooth 9.6

2/06/01

Advertising