Samsung 220TN - Manual (Page 21)

LAN
(LAN Connection Terminal) Connect the LAN cable.
Connecting USB
Connecting USB
Turn on your monitor and PC. If you connect the cable to the connector of your monitor and the
2 cable to the 2 connector of your PC, the installation programs related to microphone and
camcorder are performed automatically.
You can use a USB device such as a mouse, keyboard, Memory Stick, or external hard disk drive by
connecting them to the
2 port of the monitor without connecting them to the PC.
The USB port of the monitor supports High-Speed Certified USB 2.0.
High speed Full speed Low speed
Data Rate 480 Mbps 12 Mbps 1.5 Mbps
Connect the port of the monitor and the USB port of the computer with the USB cable.
Connect the port of the USB monitor and a USB device with the USB cable.
The use procedures are as the same as those for using an external device connecting to the PC.
To use port, you have to connect the to the PC.
Make sure to use the USB cable supplied with this monitor to connect the monitor's
port and your computer's USB port.