Sanyo DWM-4500 - Manual (Page 16)

-E15-
+
Note:
Please follow the steps before turning on the power.
1. Connect to the component video input jacks. (The VIDEO
OUT or S-VIDEO OUT jack connection is not necessary.)
*Please consult your local audio/video dealer.
*Component video cable (not supplied)
Green
Red
Blue
Green Red Blue
TV with progressive-scan capability
Progressive-scan TV Connection
Your TV must be capable of handling progressive scanning and have component video input capability.
2. Set the VIDEO OUT SELECT switch to the COMPONENT
position.
Progressive Scanning
While interlaced scanning produces one frame of video in two
fields, progressive scanning creates one frame in one field.
Conventional interlaced scanning constitutes one second with
30 frames (60 fields), but progressive scanning constitutes it with
60 frames from scratch. Progressive scanning can reproduce
sharper picture with high resolution for still image or other picture
containing long texts or horizontal lines.
This model has compliance with 525p (progressive) system.
Notes:
•
Please refer to your TV instruction manual.
• When you connect the unit to your TV, be sure to turn off the
power and disconnect both units from the wall outlet until all
the connections have been made.
• Do not connect the unit to a VCR directly. The playback
picture will be distorted because DVD video discs are copy
protected.
Interlaced scanning
Progressive scanning
3. Set the unit to the PROGRESSIVE mode. See pages E21
and E35.
Sub-woofer (Powered speaker)
Main unit (Right side)
Use of your VCR and Sanyo DVD Home Theater System DWM-4500
1. We recommend that you connect your VCR sound output to
this Home Theater System.
Please test your VCR sound in Virtual 5.1 Channel Surround
Sound.
Connect the audio cables (not supplied) between the AUX
jacks of the Home Theater System and the AUDIO OUT
jacks of your VCR.
If your TV has the audio output jacks, you may replace this
VCR connection with TV connection.
Please refer to Additional Connection Examples to enjoy
your TV sounds on page E16 of the Instruction Manual.
2. We do not recommend that you connect your DVD Home
Theater System Video Output signal through your VCR and
then to your TV system.
DVD Video Disc Copy Protection Guard may affect your VCR
and you may not get a clear picture on your TV Display.
If you have any difficulties connecting your VCR with the use of
this Home Theater System, please call SANYO'S HELP-LINE
1-800-813-3435 (Weekdays: 7:30am - 4:00pm Central Time).