Connections, Power sources, How to use – Sony SRS-PC41 User Manual

Page 2: Using on house current battery installation, Connecting to a discman, walkman, etc, Connecting to a sub woofer

Advertising
background image

Connections

Connect the left speaker to the source equipment.

When the system is connected to a monaural jack of a
radio, etc., the sound may only come through the left
speaker. In such a case, use the optional Sony plug
adaptor PC-236MS.
The sound will come through both speakers.

To connect to a stereo phone-type
headphones jack

Use the optional PC-234S plug adaptor or RK-G138
connecting cord.

When the AC power adaptor is connected to the
system, internal batteries are automatically
disconnected.

Power Sources

Using on house current

Battery installation

AC power adaptor
(supplied)

to DC IN 9V jack

Note on the AC power adaptor

Use only the supplied AC power adaptor. Do not use
any other AC power adaptor.

Polarity of the plug

Battery Replacement

When the batteries are weak, the POWER indicator
will start flickering and become faint, or the playback
sound will be distorted or unstable.
In such a case, replace all the batteries with new ones.
For battery life, see “Specifications”.

Note

Remove the batteries as illustrated.

Left speaker
(Rear)

1

Six size AA (R6)
batteries (left
speaker only)

2

Left speaker (Rear)

to a wall outlet

– side

Connecting to a Discman, Walkman, etc.

Right speaker (Rear)

Left speaker (Rear)

to R OUT jack of the
left speaker

Left speaker (rear)

Connecting cord
RK-G136HG (not supplied)

to an audio
output jack
(stereo mini
jack)

to INPUT 2
jack

to an audio
output jack
(stereo mini jack)

Personal
computer

to R OUT jack
of the left
speaker

Note

When two types of equipment are connected to the
system and are played at the same time, the sound
from both of them will come out of the speakers.
When you wish to play only one equipment, make
sure that the other equipment is turned off or its
volume is turned down.

to a personal computer

Connecting to a sub woofer

How to Use

1

Press the POWER switch (Ø ON).
The POWER indicator lights up.

2

Adjust the VOLUME control.

3

Press the IBB switch (Ø ON) to reinforce the
bass.
Turn off the MEGABASS (Walkman) or BASS
BOOST (Discman, etc.) function as it may cause
sound distortion.
Press the switch again (ø OFF) to cancel the bass
boost function.

Connect a sub woofer to AUDIO OUT jack (stereo mini jack). The volume of the connected speaker system is
adjustable with the VOLUME control.

to AUDIO OUT
(stereo mini jack)

Left speaker (Rear)

Sub woofer

to a personal computer

to R OUT jack of
the left speaker

Listening to the sound through the built-in amplifier

POWER
indicator

Left speaker (Front)

Right speaker (Front)

After listening, press the POWER switch (ø OFF/
DIRECT).
The POWER indicator goes off.

Listening to the sound without the
built-in amplifier

Set the POWER switch (ø OFF/DIRECT). In this
case, the VOLUME control and the IBB switch do not
operate. Adjust the volume with the connected
equipment.

Advertising