SMC Networks SMC8011CM - Manual (Page 19)

E
THERNET
I
NSTALLATION IN
W
INDOWS
11
5. Select the option “Obtain an IP Address.” The EZ Connect
Ethernet/USB Cable Modem will automatically assign an IP address
to your computer.
6. Click the “Gateway” tab and record the addresses listed under
“Installed gateways.”
7. Click the “DNS Configuration” tab. Locate the DNS servers listed
under “DNS Server Search Order.” Record any listed addresses.
8. After writing down your settings, check to make sure you have
recorded them correctly. Click the “IP Address” tab and then click
“Obtain an IP address automatically.” Click “OK.”
9. Windows may need your Windows 95/98/Me CD to copy some files.
After it finishes copying, it will prompt you to restart your system.
Click “Yes” and your computer will shut down and restart.
Windows 2000
1. Select “Start/Settings/
Network and Dial-up Connections.”
2. Double-click “Local Area Connection.”
3. Click “Properties.”
4. Select “TCP/IP” from the list of network protocols.
5. Click “Properties.”
TCP/IP Configuration Setting
IP Address
____.____.____.____
Subnet Mask ____.____.____.____
Primary DNS Server ____.____.____.____
Secondary DNS Server ____.____.____.____
Default Gateway ____.____.____.____
Host Name ____.____.____.____