Philips Saeco Milk Island - Manual (Page 17)

17
Clean the connector with a damp cloth. For thorough cleaning, fi ll the clean carafe with water and dispense steam
(follow the instructions from step 2 to 6 on page 15).The carafe and the emulsifying group’s components may be
washed in a dish-washer for home use.
Re-assemble all the covered
components. Replace the
emulsifying group onto the carafe.
Warning: make sure that the
cover is correctly inserted in the
tube located inside the carafe.
10 11
Assemble the handle.
Place the upper part onto the
carafe, as shown in the fi gure.
13
At this point, fi rmly press so as to
join both parts.
12
Keep the upper part angled onto
the carafe, and slide the lower
part of the handle underneath the
carafe.
14
The milk carafe is now assembled
and ready for use.
Warning: only use the milk
carafe if intact and if all
components are correctly
assembled.