Shoprider UL7WR/ULWR11 - Manual (Page 10)

8/16/2005 10
Locking/Unlocking the VSI Joystick
LOCK MODE: The VSI controller can be locked to prevent
unauthorized use. The locking method is achieved through a
sequence of key presses and joystick movements, as detailed below.
To lock Powerchair controller:
ƒ While the controller is switched on, depress and hold the on/off
button.
ƒ After 1 second the controller will bleep. Now release the on/off
button.
ƒ Push the joystick forward until the controller bleeps.
ƒ Push the joystick in reverse until the controller bleeps.
ƒ Release the joystick, there will be a long bleep.
ƒ The Powerchair controller is now locked.
To unlock the Powerchair controller:
ƒ Use the on/off button to switch the controller on. The maximum
speed/profile indicator will be rippling up and down.
ƒ Push the joystick forward until the controller bleeps.
ƒ Push the joystick in reverse until the controller bleeps.
ƒ Release the joystick, there will be a long bleep.
ƒ The Powerchair is now unlocked.
SLEEP MODE: If the controller is left on and not used for more than
ten minutes, the controller will automatically “go to sleep”. This is
recognized by a slow intermittent flash of the battery indicator lights.
Simply turn the controller off and back on to reset.