Sony RM-VL610 - Manual (Page 43)

43
KEY DISPLAY
qdPOWER
3qh
1 – 9, 0, ENT
1 INPUT
qf INFO
(DISPLAY)
qa EXIT
(CLEAR)
q; GUIDE
(EPG)
qs m
qs H
qs M
qs REC z
qs x
qs X
qs .
qs >
qs
qs
wa MENU
ws f
ws F
ws G
ws g
qk RECALL
DVR (Digital video recorder)
FUNCTION
To turn on and off.
To change the channel.
For example, to change
to channel 5, press 0 and
5 (or, press 5 and ENT).
To switch the output of
the SAT receiver to the
TV. (When connecting a
TV cable or antenna to
the receiver, the output
switches between a TV
and SAT program).
To turn on the display.
To clear the setting.
To bring up Master
Guide.
To rewind.
To play.
To fast-forward.
To record, press H
while pressing REC z*
2 .
First release H, then
release REC z.
To stop.
To pause.
To proceed to the
previous location.
To proceed to the next
location.
To operate “Flash –.”
To operate “Flash +.”
To call up the MENU
display.
To move the cursor
upward.
To move the cursor
downward.
To move the cursor to
the right.
To move the cursor to
the left.
To select the channel
previously selected.
KEY DISPLAY
ws OK
qj CHANNEL
+/–
7 A
(REPLAY* 1 )
8 LIST* 1
7 B* 1
(Live TV)
ql PAGE +* 1
(THUMBS+)
ql PAGE –* 1
(THUMBS–)
qgSLEEP
FUNCTION
To enter the selection of
the MENU display.
Channel up: +
Channel down: –
To replay
Or to go into REC/
REVIEW mode during
play (After about 5-
second rewind, replay
begins).
To call up the title of the
recorded program.
To bring up Master
Guide.
To select the desired
recorded program. (It is
necessary to have
recorded the desired
program).
To select the desired
recorded program. (It is
necessary to have
recorded the desired
program).
To call up “Tivo” menu.
* 1 This key corresponds to Tivo service or
the replay service. Refer to its instruction
manual for details.
* 2 In order to avoid recording by
mistake, the REC z button does not
work by itself.
Continued