Safety 1st 9100 - Manual (Page 4)

9c
Press Pins
PAGE 4
8
Fold Down Bed Rail (to change bedding
or for periods of non-use):
Push forward slightly on bed rail and press
two upper release buttons (Figure 8).
Press two lower release buttons and pull
up handle (Figure 8a) to expose elbow
hinges.
Fold the frame away from the bed and
down toward the floor (Figure 8b).
To reinstall bed rail: repeat steps 5 to 7
from Installing Your Bed Rail.
8
8b
Fold Down Bed Rail
• Ensure that fingers are kept clear of hinged
parts when folding bed rail.
• Keep children away from bed when folding
bed rail up or down.
CAUTION:
Upper
Release
Button
• Use handle when releasing buttons.
WARNING:
8a
Lower
Release
Button
9
Disassemble for Long Term
Periods of Non-use:
Place bed rail in fold down position.
Press pin on each support foot and
remove support rod (Figure 9).
Press pin on support rod and slide
support rod inside itself (Figure 9a).
Locate small hole on side of panel (Figure
9b). Using two screwdrivers, press both
tabs inside holes at once and pull bed rail
panel from side panel. Repeat on other
side. Panel can now be removed.
Locate two pins underneath fabric. Press
both pins and collapse bed rail panel
(Figure 9c).
Fold side panels forward (Figure 9d).
NOTE: If you saved the box that the bed
rail came in, the parts can now fit into
the box.
Long Term Storage
9d
Press
Button
9a
Press Pin
9 Fold Down Position
9b
Press Tabs
Press Pin