Sony AVD-S10 - Manual (Page 31)

Pla
ying Discs
31 GB
Resuming Playback from
the Point Where You
Stopped the Disc
(Resume Play)
When you stop the disc, the receiver
remembers the point where you pressed x
and “RESUME” appears on the front panel
display. As long as you do not open the disc
tray, Resume Play will work even if the
receiver enters standby mode by pressing
[/1.
1
While playing a disc, press x to
stop playback.
“RESUME” appears on the front panel
display, so you can restart the disc
from the point where you stopped the
disc.
If “RESUME” does not appear,
Resume Play is not available.
2
Press H.
The receiver starts playback from the
point where you stopped the disc in
Step 1.
z To play from the beginning of the disc, press x
twice, then press H.
H x
Saving the power in standby mode
Press [/1 on the remote once.
z While the receiver is in standby mode, the
STANDBY indicator on the receiver lights up.
To cancel standby mode
Press [/1 on the remote once.
Additional operations
To Operation
Stop Press x.
Pause Press X.
Resume play after Press X or H.
pause
Go to the next chapter, Press >.
track, or scene in
continuous play mode
Go back to the Press ..
preceding chapter, track,
or scene in continuous
play mode
Stop play and remove Press OPEN/CLOSE.
the disc
Mute the sound Press MUTING. To
cancel muting, press it
again or turn up the
volume.
Note
Do not push the disc tray when closing it. Press
OPEN/CLOSE to close the disc tray.
OPEN/CLOSE
./>
H
X
x
MUTING
continued