Tcp/ip n – SMC Networks SMC7003USB V.2 User Manual
Page 44
Advertising
TCP/IP N
ETWORKING
O
PTIONS
4-10
2. In the Command Prompt window, type “IPCONFIG /RELEASE”
and press the ENTER key.
3. Type “IPCONFIG /RENEW” and press the ENTER key. Verify that
your IP Address is now 192.100.100.xxx (where x is 1 - 14,
16 - 254), your Subnet Mask is 255.255.255.0 and your Default
Gateway is 192.100.100.15. These values confirm that your ADSL
Router is functioning.
Type EXIT and press ENTER to close the Command Prompt window.
Your computer is now configured to connect to the modem.
Advertising