Star Micronics SP342F-A - Manual (Page 7)

– 5 –
2. LOADING THE PAPER
2-1. SP312
1 Turn the power switch on the printer
to the off position.
2 Set DIP switch 2-4 to match the
width of the paper that is being used.
(Refer to Installation Manual.)
(All the switches in the DIP switch
array are factory preset to the “ON”
position.)
3 To remove the rear cover lift it up
approx. 3cm and push it backwards.
4 Dependant on the width of the paper
(2.25 or 3 inches), align the roll
paper holders at the specified posi-
tion .
Fig. 2-2 Mounting the roll paper holders
(SP312)
Fig. 2-1 Removing the rear cover
(SP312)
DIP
switches
ON OFF
2-4
3.25 inches
2.25 inches
3.0 inches
ENGLISH