Installation instructions, Dimensions – SECO-LARM USA ENFORCER SD-995C User Manual
Page 2
INSTALLATION INSTRUCTIONS
Fail-Secure
Fail-Safe
Round
screw
Flat
screw
Fig. 1 - Measuring
the latch line.
Fig. 2 -
Measuring
the center
line.
Fig. 3 -
Aligning
the
template.
Fig. 4 -
Cutting the
hole using
the template.
Fig. 5 -
Fixing the
metal tabs
(metal door).
Fig. 6 - Programming
for fail-secure or
fail-safe.
Fig. 7 - Mounting.
Connect the wires
and insulate
before installing
the strike.
Door jamb
17mm
Door jamb
Latch line
Center line
Template
15mm
15mm
M4x12
screw
M4x12
screw
M5x12
screws
Note:If wood door,
use a chisel to
knock out a 3mm.
(1/8 inch) deep
space as shown on
the template.
Center line
Door latch
Door jamb
Latch line
Door jamb
Door latch
Deadlatch pin
Doorknob
Door
Vertical latch
distance
- - - - - - -
- - - - - - -
4.88”
123.85mm
- - - - - - - - - - -
- - - - - - - - - - -
4.13”
105mm
- - - - - - - - -
- - - - - - - - - -
3.37”
85.6mm
- - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - -
1.77”
45mm
- - - - - - - - -
- - - - - - - - - -
7.95”
202mm
- - - - - - - - - - - -
- - - - - - - - - - - -
7.32”
186mm
- - - - - - - - - - - -
- - - - - - - -
1.42”
36mm
- - - - - - - - - -
- - - - - - - - - - - - - - -
1.25”
31.75mm
Dimensions
- - - - -
-
- - - - - - - - - - - - - -
1.3”
33mm
- - - - - - - - -
- - - - - - - - - - - - - - - - -
0.67”
17mm
0.12”
3mm
1.77”
45mm
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - -
0.71”
18mm
- - - - - - - - - - - - - - - - - - - -
-
1.69”
43mm
0.625”
15.9mm
- - - - - - - - -