Woodstock SHOP FOX W1709 - Manual (Page 23)

OPERATIONS
OPERATIONS
-21-
Sanding
Load
Amp
Meter
Sanding
Belt Stop
Button
Table
Start
Key Table
Stop
Key
Table
Down
Key
Table
Up
Key Table
Set
Key
Key
Pad
Feed
Belt
Stop
Button
Emergency
Stop
Button
Power
Lamp
Feed
Belt
Start
Button
Digital
Readout
Sanding
Belt
Start
Button
Control Panel
Below is a summary of your sander control
panel and the components that it controls. Use
this information to become familiar with your
sander. See
Figure 24.
• Power Lamp:
Indicates when machine has power to
the control panel.
• Emergency Stop Button:
Stops all electrical power to motors in
event of emergency, and stops sanding
drums with an air-disc brake.
• Sanding Belt Start and Stop Buttons:
Cycles the sanding motor
ON and OFF if
the sander has air pressure and the belt is
tensioned.
• Feed Belt Start and Stop Buttons:
Cycles the conveyor motor
ON and OFF
for feeding wood into the sander.
• Table Up and Down Keys:
Manually cycles the table lift motor to
raise and lower the table.
• Table Start and Stop Keys:
Cycles the table lift motor in and out of
the automatic raise and lower function.
• Sanding Load Amp Meter:
Indicates the current amp load on the
sanding motor when a sanding operation
is in progress.
• Digital Readout: Displays current sander
settings.
• Input LED: Indicates the sander is waiting
for new numerical dimension values.
• Run LED: Indicates the conveyor lift
motor is operating.
• Key Pad: Allows you to input your
numerical sanding specifications for
automated sanding control.
Run
LED
Input
LED
Figure 24. Control panel interface.