Savin 4700WD - Manual (Page 34)

User Tools (System Settings)
22
2
❖ ❖ ❖ ❖ Fine Magnification: Copier
Depending on the type of paper, and on the effects of humid or hot condi-
tions, the copy paper can expand or shrink slightly. This can mean that the
size of the copy and the original do not match, If this happens, you can specify
the vertical and horizontal magnification ratio. You can specify this setting for
each paper type. (Plain paper, Translucent Paper, Film, Other)
• -1.0% to 1.0% (in 0.1% steps)
Note
❒ Default: 0
❒ The value can be set from -1.0% to 1.0% (in 0.1% steps).
❒ To set the Fine Magnification setting, measure the length of the original
and the copy image to calculate the ratio.
ZEDG310E
ZEDG010E
Calculating the Correction Value (%)
To copy at the same size as the original
Example)
Copy Original
Horiz. Horiz.
... For the example above:
correction value(%)
Set the correction value (horizontal) to 0.8%.
DolphinGB-Syst-F_V4_FM.book Page 22 Wednesday, May 2, 2001 1:19 PM