Shark V1315 - Manual (Page 6)

RELEASING THE POWER CORD
Secure the power
cord plug on the
power cord.
WARNING: To reduce the risk of electric shock, this
appliance has a polarized plug (one blade is wider
than the other). This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact
a qualified electrician to install the proper outlet. Do
not modify the plug in any way.
1
1
2
2
5
PREPARATIONS BEFORE USE
WINDING THE POWER CORD
Hook the power cord over
the clip which is located on
the upper cord storage hook
as shown. Wind the power cord around the cord
storage hooks.
Rotate the upper cord storage hook
downward. Return the hook to the
upright position before
attempting to rewind the
power cord.
INSERTING THE POWER CORD PLUG
Upper Cord
Storage Hook
Plug Side
Clip
Cord Storage
Hooks