Silex technology Silex SX-510 - Manual (Page 2)

SX-510 Specifications
Dimensions
110.58 x 7.26 x 25.52 mm (4.35 x3.08 x 1.00 inches), not including
connectors
Weight
140 g (5 oz)
Operating Temperature
0
° to 50° C (Storage Temperature -20° to 70° C)
Maximum Temperature Change Per Hour
20
° C Relative Humidity, Operating
0% to 90% non-condensing
Relative Humidity, Storage
10% to 90% non-condensing
Altitude
3.1km (operating; 9km (storage)
Serial Interface
RS232C/RS-422/RS-485 (DSUB9) x 1 port; up to 921Kbps
Ethernet Interface
10Base-T and 100Base-T (autosensing)
Wireless Interface
802.11b/g; 54, 48, 36, 24, 18, 11, 9, 6, 5.5, 2, and 1 Mbps; 2.4GHz ISM
band; 802.11a: 54, 48, 36, 24, 18, 11, 9, and 6Mbps; 5GHz ISM band
Power Supply
Supplied from included AC adaptor (100-240VAC, 50/60Hz) or
through pin 9 on DBSUB9 connector
Antennas
Two (2) internal diversity antennas
Electrical
500mA@+5V max (wired models); 600mA@+5V max (wireless)
Supported Protocols
TCP, IP, UDP, ARP, Telnet, ICMP, SNMP, DHCP, BOOTP, Auto IP,
HTTP, SMTP, TFTP, SLP, DNS, Dynamic DNS, RFC2217
Regulatory Compliance
FCC, IC & CE Class B EMC standards; FCC Part 15 subpart C and E, IC
& CE wireless standards; UL 60950-1 (CSA mark), CSA 60950-1,
EN60950 safety standards; IEC60601-1-2:2007, EN60601-1-2
medical EMC standards; ANSI/IEEE Std. C95.1-1999, RSS-102 SAR
standard; RoHS/WEEE environmental standards; IP21 rated
enclosure; IEC 60601-1 rated power supply
Management and Utilities
Serial Port Emulator, ExtendView (GUI), Web Browser Interface,
Command Line Console (accessible via serial port or TELNET),
SNMP MIB I and II, Firmware Download via TCP/IP (Update IP
utility, master or slave mode TFTP, BOOTP with multiple server
download), On-Line HELP
Wireless Security
WPA and WPA2 (personal and enterprise modes), PAP, MS-
CHAPv2, 802.1x EAP with TLS/TTLS/ LEAP/PEAP/FAST, WEP
Wired Security
802.1x EAP with TLS/TTLS/PEAP/FAST