SOYO G668 - Manual (Page 15)

SOYO G668 Ethernet IP Phone User Guide
13
LCD SCREEN INSTRUCTION
network
settings
Press Speaker
ip type
1 [DHCP]
Press Local IP, then 0, then Speaker
ip type
2 [PPPoE]
Press Volume+, until you see “ip”
ip
Press Local IP, input your static IP and press Speaker, then press
Volume+ until you see “subnetmask”
subnetmask Press Local IP, input specific network mask and press Speaker, then
press Volume+ until you see “router”
router
Press Local IP, input specific router IP and press Speaker, then press
Volume+ until you see “dns”
dns
Press Local IP, input specific DNS address and press Speaker, then
press Redial until you see “save settings”
save
settings
Press Speaker
save
Are you sure?
Press Speaker to confirm the changes
Ready for calls
SOYO_Group Allow a few seconds for the system to boot the new configuration and you
are ready to make calls
Warning
Users are not allowed to change “protocol settings”, “phone settings”, or “audio
settings” without proper guidance from the VoIP Service Providers or Carriers.