Samsung 440 User Manual
Page 5
5
01
Getting Started
English
Install the Stand
See separate guide for installing the stand.
Stand (1EA)
Guide Stand (1EA)
Screws (8EA)
Follow the steps below to connect the TV to the stand.
1. Connect the Guide Stand to the Stand using four screws (M4 X L12) as shown.
2. With your TV upright, connect the TV to the Stand.
3. Fasten four screws (M4 X L8) at position.
✎
NOTE
x
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
x
Make sure that at least two people lift and move the PDP TV.
[
Do not insert your fingers into the stand base slot of the TV when installing the stand base.
x4 (M4 X L12)
x4 (M4 X L8)
Rear
Front
(M4 X L12)
x4
Top View
DO NOT USE
CHEMICALS
DO NOT USE
GREASE
DO NOT USE
OIL
ATTENTION
(M4 X L8)
x4
(Correct assembly)
(Incorret assembly)
[PD450-ZA]BN68-03325A-00Eng.indb 5
2011-02-01 오후 3:07:29