Sony DVP-NS405 - Manual (Page 24)

24
Connecting to an AV amplifier (receiver) with a digital input jack having
a Dolby Digital, MPEG audio, or DTS decoder and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio, or DTS decoder function
of your AV amplifier (receiver). You are not able to enjoy the surround sound effects of this
player.
Note
After you have completed the connection, be sure to
set “DOLBY DIGITAL” to “DOLBY DIGITAL”
and “DTS” to “ON” in Quick Setup (page 25). If
your AV amplifier (receiver) has an MPEG audio
decoder function, set “MPEG” to “MPEG” (page
63). Otherwise, no sound or a loud noise will come
from the speakers.
D
LINE (RGB) - TV
DOLBY DIGITAL PCM/DTS/MPEG/
COAXIAL OPTICAL S VIDEO OUT LINE OUT
DIGITAL OUT
R -AUDIO- L VIDEO
D
DOLBY DIGITAL
PCM/DTS/MPEG/
COAXIAL OPTICAL
DIGITAL OUT
Front (R)
Front (L)
Rear (R)
AV amplifier (receiver) having
a decoder
Subwoofer Centre
Coaxial digital cord
(not supplied) Optical digital cord
(not supplied)
Remove jack cap
before connecting
(DVP-NS405/NS410
only)
[Speakers]
CD/DVD player
l : Signal flow
[Speakers]
Rear (L)
to optical digital input
or
to coaxial digital input
to DIGITAL OUT
(COAXIAL or OPTICAL)