Sony SLV-675HF - Manual (Page 51)

SONY SLV-675HF/676HF (E) 3-856-995-11 (1)
uick reference to using the VCR
Sony Corporation Printed in Malaysia
If you have any questions about this product, you may call: Sony Customer Information Center
1-800-222-SONY (7669) or write to: Sony Customer Information Center Sony Drive, Mail Drop
#T1-11, Park Ridge, NJ 07656
Q
Hookup 3
To play a tape
1 If you made A/V
connections, set the TV to
video input.
If you didn’t use A/V
hookup:
• Turn on the cable box.
• Set the cable box to
channel 3 or 4.
• Set the TV to the output
channel of the cable box
(usually 2, 3 or 4).
2 Insert a tape and press
PLAY.
To record a program
1 Press MENU and select
TIMER SET/CHECK.
2 Set the date, time, and tape
speed.
3 Press EXECUTE.
4 Insert a tape.
5 Press POWER to turn off
the VCR.
To watch TV
1 Turn off your VCR, or
press the VCR’s TV/VTR
button until the VTR
indicator in the display
window goes off.
2 Select the channel with
your cable box (if you have
one) or with your TV.
Hookup 1
To play a tape
1 Set the TV to channel 3 or
4 (or to video input, if you
made A/V connections.)
2 Insert a tape and press
PLAY. If there’s no picture
on your TV, press the
VCR’s TV/VTR button
until the VTR indicator
comes on in the display
window.
To record a program
1 Press MENU and select
TIMER SET/CHECK.
2 Set the date, time, and tape
speed.
3 Press EXECUTE.
4 Insert a tape.
5 Press POWER to turn off
the VCR.
To watch TV
1 Turn off the VCR, or press
the VCR’s TV/VTR button
until the VTR indicator in
the display window goes
off.
2 Set the TV to the channel
you want to watch.
Hookup 2
To play a tape
1 Set the TV to channel 3 or
4 (or to video input, if you
made A/V connections.)
2 Insert a tape and press
PLAY. If there’s no picture
on your TV, press the
VCR’s TV/VTR button
until the VTR indicator
comes on in the display
window.
To record a program
1 Turn on the cable box.
2 Set the cable box to the
channel you want to
record.
3 Press MENU and select
TIMER SET/CHECK.
4 Set the date, time, and tape
speed.
5 Press EXECUTE.
6 Insert a tape.
7 Press POWER to turn off
the VCR.
Leave the cable box on.
To watch TV
1 Turn off your VCR, or
press the VCR’s TV/VTR
button until the VTR
indicator in the display
window goes off.
2 Turn on your cable box.
3 Set the TV to the cable box
output channel (usually 2,
3, or 4).
4 Set the cable box to the
channel you want to
watch.