Data services – Siemens CXT70 User Manual
Page 91
©
Sieme
ns
AG
2003, C:\Sieme
ns\P
roduk
te
\CX70\output\FUG\C
X70
_FU
G_e
n_
040910_
rs_
pk_druck\ULYR_C
onnectivi
ty.fm
Setup
90
VAR Langua
ge: en; V
A
R issue
date: 040728
left page (90)
of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
Data services
Basic setting and activation of the
connection profiles for data trans-
mission such as
MMS, WAP
.
The phone default setting varies
from service provider to service pro-
vider.
• The settings have already been
implemented by the provider. You
can start immediately.
• Access profiles have already been
created by your provider. Then
select and activate profile.
• The access profiles must be
configured manually. In this case,
you will receive the necessary
data from the service provider or
via the "Setting Configurator" at
Select profile
I
Select the profile.
C
Confirm selection.
Set profile
I
Select the profile.
§Options§
Open menu.
§Edit§
Open the selection.
I
Select
CSD settings
, and/or
GPRS settings
.
§Edit§
Select service and enter
data (see below).
§Save§
Save settings.
CSD
(Circuit Switched Data)
GPRS
(General Packet Radio Service)
You can only start to use GPRS once
you have activated GPRS on your
Dial-up
number:
Enter ISP number.
Call type:
Select ISDN or
analogue.
Login:
Enter login name.
Password:
Enter password (shown
as a series of asterisks).
DNS1 / DNS 2:
(optional).
APN:
Enter service provider
address.
Login:
Enter login name.
Password:
Enter password (shown
as a series of asterisks).
DNS 1 (opt.):
DNS 2 (opt.):
(optional).