Siemens CXT70 - Manual (Page 94)

©
Siem
ens AG
2003, C
:\Siem
ens
\P
ro
dukte\CX70\output\FUG
\CX70_FUG_
en
_040910_
rs_pk_druck\UL
YR_
Security.fm
93 Setup
VAR Langua
ge: en; V
A
R issue
date: 040728
right page (93) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
Setup Security
C
¢
T
¢
Security
¢
Select function.
Auto key lock
If activated, the keypad is locked
automatically if no key has been
pressed for one minute in standby
mode. This prevents the phone from
being used accidentally. However,
you can still be called and you can
still make an emergency call.
Direct call
(Phone-code protected)
Only one phone number can be
dialled (see also p. 27).
Only
‚
b
(PIN 2 or phone code protected)
Dialling options are restricted to
SIM-protected phone numbers in the
Phonebook. If only area codes are
entered, relevant phone numbers
can be added to these manually
before dialling.
If the SIM card does not support
PIN 2 input, the whole Phonebook
can be protected with the phone
code.
This SIM only b
(Phone-code protected)
The phone can be connected to
a SIM card when the phone code is
entered. Unless the phone code is
known the phone will not operate
with a different SIM card.
If the phone is to be used with a dif-
ferent SIM card, enter the phone
code when requested.
Codes
Description, see p. 17:
PIN control, Change PIN, Change PIN2,
Chg.phonecode
Additional information
The keypad can also be directly locked and
unlocked in idle state.
In each case:
#
Press and hold.