Sharp Aquos LC 45GD5U - Manual (Page 29)

29
Watching TV (TV Guide On Screen)
Press a/b to select the program for which
you want to set the reminder.
Press MENU to display “Schedule Options”.
Repeat steps 1 to 2 in Using SCHEDULE
function .
1
2
3
Edit reminder
Press a/b to select “edit reminder”, and then
press
ENTER to display “Remind Options”.
• You can change the setting items again.
Press ENTER to highlight “schedule
reminder”.
4
5
Press ENTER again to exit.
6
Press a/b to select the program you want
to delete.
Press MENU to display “Schedule Options”.
Repeat steps 1 and 2 in Using SCHEDULE
function .
1
2
3
Delete recording
Press a/b to select “delete recording”, and
then press
ENTER .
• Confirmation screen displays.
Press a/b to select “yes” or “no”.
4
5
Press a/b to select the program you want
to edit.
Press MENU to display “Schedule Options”.
Repeat steps 1 to 2 in Using SCHEDULE
function .
1
2
3
Edit recording
Press a/b to select “edit recording”, and then
press
ENTER to display “Record Options”.
• You can change the setting items again.
Press ENTER to highlight “schedule
recording”.
4
5
Press ENTER again to exit.
6
Press a/b to select the program you want
to record.
1
Press a/b to select “new manual recording”
and then press
ENTER .
New manual recording
Aside from setting recordings using the program
LISTINGS menus, you can also define the schedule of
recordings manually by following the steps below.
• “Record Options” screen displays.
Press ENTER to highlight “schedule
recording”.
NOTE
• The program set to be manually recorded is listed by
channel number in the SCHEDULE.
5
Press ENTER again to exit.
2
3
4
Press MENU to display “Record Options”.
—
—
—
—
analog/digital air/
digital cable/input 1/
input 2/input 3
VCR/i.LINK
once/weekly/daily/off
Setup
items
date
start
end
channel
input
recorder
frequency
Description Selectable items
Set a date to record
Set a start time to
record
Set an end time to
record
Set a channel to
record using
0–9
Set the external
recording device or
antenna source
Select a recorder you
connected
Set the recording
cycle