Headlamp aiming, Bulb replacement, Halogen bulbs – Saturn 2008 Aura User Manual

Page 295: Headlamp aiming -47, Bulb replacement -47, Halogen bulbs -47, Caution

Advertising
background image

To disconnect the jumper cables from both vehicles, do
the following:

1. Disconnect the black negative (

) cable from the

vehicle that had the dead battery.

2. Disconnect the black negative (

) cable from the

vehicle with the good battery.

3. Disconnect the red positive (+) cable from the

vehicle with the good battery.

4. Disconnect the red positive (+) cable from the other

vehicle.

5. Return the caps over the positive (+) and

negative (–) terminals to their original positions.

Headlamp Aiming

Headlamp aim has been preset at the factory and
should need no further adjustment.

However, if your vehicle is damaged in a crash, the
headlamp aim may be affected. Aim adjustment to the
low-beam headlamps may be necessary if oncoming
drivers flash their high-beam headlamps at you
(for vertical aim).

If the headlamps need to be re-aimed, it is
recommended that you take the vehicle to your
dealer/retailer for service.

Bulb Replacement

For the proper type of replacement bulbs, see
Replacement Bulbs on page 5-50.

For any bulb changing procedure not listed in this
section, contact your dealer/retailer.

Halogen Bulbs

{

CAUTION:

Halogen bulbs have pressurized gas inside
and can burst if you drop or scratch the bulb.
You or others could be injured. Be sure to
read and follow the instructions on the bulb
package.

5-47

Advertising