Sunwave Tech. SRC-7000 - Manual (Page 70)

SRC-7000 User’s Manual
68
5. There are two choices in “Upgrade type”, “All (Reset to factory
default)” and “Pre-programmed code”
„ If you select “All (Reset to factory default)”, you will
upgrade your pre-programmed code database and erase all
your settings on the SRC-7000 simultaneously.
„ If you select “Pre-programmed code”, you will upgrade your
pre-programmed code database and keep your settings on
the SRC-7000.
6. After selecting the “Update type”, click the “Upgrade” button to start
the updating process.
7. You will see “OK” message after completion.