6 solution suggestions for problems – Smeg LBS66-1 User Manual

Page 11

Advertising
background image

11 - EN

6 Solution suggestions for problems

Problem

Cause

Explanation / Suggestion

Program cannot

be started or

selected.

Machine may have

switched to self

protection mode due to

an infrastructure problem

(such as line voltage, water

pressure, etc.).

Reset your machine by pressing “Start/Pause/

Cancel” button for 3 seconds. (see, Canceling

a Program)

There is water

coming from

the bottom of

the machine.

There might be problems

with hoses or the pump

filter.

Be sure the seals of the water inlet hoses are

securely fitted.

Tightly attach the drain hose to the tap.

Make sure that the pump filter is completely

closed.

Machine

stopped

shortly after

the program

started.

Machine can stop

temporarily due to low

voltage.

It will resume operating when the voltage is

back to the normal level.

It continuously

spins.

Remaining time

does not count

down.

There may be an imbalance

of laundry in the machine.

The automatic spin correction system might

have been activated due to the unbalanced

distribution of the laundry in the drum.

The laundry in the drum may be clustered

(bundled laundry in a bag). Laundry should be

rearranged and re-spun.

No spinning is performed when the laundry is

not evenly distributed in the drum to prevent

any damage to the machine and to its

environment.

It continuously

washes.

Remaining time

does not count

down.

In the case of a paused

countdown while taking in

water:

Timer will not countdown

until the machine is filled

with the correct amount of

water.

The machine will wait until there is a sufficient

amount of water to avoid poor washing results

due to lack of water. Then the timer will start to

count down.

In the case of a paused

countdown at the heating

step:

Time will not count

down until the selected

temperature for the

program is reached

In the case of a paused

countdown at the spinning

step:

There may be an imbalance

of laundry in the machine.

The automatic spin correction system might

have been activated due to the unbalanced

distribution of the laundry in the drum.

The laundry in the drum may be clustered

(bundled laundry in a bag). Laundry should be

rearranged and re-spun.

No spinning is performed when the laundry is

not evenly distributed in the drum to prevent

any damage to the machine and to its

environment.

Advertising