Scientific Atlanta DPX130 - Manual (Page 11)

11
Connection Diagram
Installation
Follow these steps for proper installation.
1. Power down your PC and unplug it from the
power source.
2. Connect the active RF coaxial cable to the
CABLE IN connector. Use an optional cable
signal splitter to add a TV, a DHCT or set-top
converter, or a VCR.
3. Connect your PC to either the Ethernet port or
the USB port using one of the appropriate
supplied cables.
4. Insert the AC power adapter cord into the DC
power connector on the back of the cable modem,
insert the supplied cord into the AC power
adapter, and then plug the cord into an AC power
source.
5. Plug in and power on your PC.
6. Choose one of the following options:
• To configure the TCP/IP protocol for
Ethernet—see TCP/IP Configuration on pages
12 through 14.
• To install the USB Drivers for USB—see USB
Driver Installation
on pages 15 and 16.
The following diagram illustrates one of the various
connection options that are available to you.
Note: Professional installation may be available.
Contact your local cable service provider for further
assistance.
C
LISTED E188325
US
UL
CABLE
IN
USB
ETHERNET
RESET
12 VDC
0.6A Max
Power
Supply
PC
Ethernet
Cable
RF
Cable
RF
Cables
Cable
Splitter
T9355
Power Supply
Cable-Ready TV,
VCR, or Set-Top
Converter
BYPASS
VOLñ VOL+ CH+
CHñ MENU GUIDE INFO A/B POWER