Sony CDP-CX53 - Manual (Page 9)

9
Basic Operations
Basic Operations Basic Operations
DISC
PUSH ENTER
CHECK 5 4 3
BLOCK
2 1 BLOCK FILE REPEAT PLAY MODE CLEAR
PLUS ONE
PUSH
OPEN
STANDBY
I / u
5 Push the JOG dial or press · to start playing.
The selected disc is set to the playing position, and the player
plays all the discs from the selected one (ALL DISCS) or all the
tracks once (1␣ DISC).
Adjust the volume on the amplifier.
Display information while playing a disc
While playing a disc, the display shows the current disc number, track
number, playing time of the track and the next disc number.
To stop playback
Press p.
Front cover
≠/± · P
To
Pause
Resume playing after pause
Go to the next disc
Go back to the preceding disc
Go to the next track
Go back to the preceding track
Stop playing and remove the disc
You need to
Press P
Press P or ·
Press DISC SKIP + once.
Hold down the button to skip discs.
Press DISC SKIP – once.
Hold down the button to skip discs.
Press ±
Press ≠
Open the front cover, then push the JOG
dial. The disc comes to the loading
position.
JOG
p
Current disc number
Current track number Playing time of the track
Next disc number
1 8 2 3 4 5 6 7 ALL DISC S
DISC TRACK MIN SEC NEXT DISC
CD 1
20 1 38 0 2 8
When you turn off the player
by pressing the I/u (standby
mode)
The player remembers the
last playing disc and the
play mode (Continuous,
Shuffle (see page 12) or
Program (see page 13)).
When you turn on the
player again, therefore, the
player plays the same disc in
the same play mode. Note
that the player does not
remember this information,
if you turn off the player by
pressing the power switch of
the amplifier or receiver
while the AC power cord is
connected to the switched
AC outlet of the amplifier or
receiver.