Sony DVP-NS300 - Manual (Page 63)

S
e
tt
ings
a
nd Adjus
tme
nts
63
x MPEG
Selects the MPEG audio signals output via
the DIGITAL OUT (COAXIAL and
OPTICAL)
jacks .
x DTS
Selects if DTS signals are output via the
DIGITAL OUT (COAXIAL and OPTICAL)
jacks .
Note
If you select one of the TVS settings while playing a
DVD, the player does not output the following signals
from the DIGITAL OUT (COAXIAL and OPTICAL)
jacks.
— Dolby Digital signals (when you set “DOLBY
DIGITAL” in “ AUDIO SETUP” to “D-PCM”)
— MPEG audio signals
PCM Select this when the player is
connected to an audio component
lacking a built-in MPEG decoder. If
you play MPEG audio sound tracks,
the player outputs stereo signals via
the DIGITAL OUT (COAXIAL and
OPTICAL) jacks.
MPEG Select this when the player is
connected to an audio component
having a built-in MPEG decoder. If
the player is connected to an audio
component lacking a built-in MPEG
decoder, do not set this.
Otherwise, when you play the
MPEG audio sound track, a loud
noise (or no sound) will come out
from the speakers, affecting your
ears or causing the speakers to be
damaged.
OFF Select this when the player is
connected to an audio component
lacking a built-in DTS decoder. Note,
however, that the DTS signals
contained in a CD are output even if
“OFF” is selected.
ON Select this when the player is
connected to an audio component
having a built-in DTS decoder.
If the player is connected to an audio
component lacking a built-in DTS
decoder, do not set this. Otherwise,
when you play the DTS sound track, a
loud noise (or no sound) will come out
from the speakers, affecting your ears
or causing the speakers to be damaged.