Sony SLV-ED818ME User Manual
Page 50
Editing
50
How to connect to a stereo system (SLV-ED915PS/TH,
ED818ME/SG, ED817TH and ED815PS only)
Connect LINE-1 IN AUDIO or LINE-2 IN AUDIO (SLV-ED915PS/TH and
ED818ME/SG only) on this VCR to the audio output jacks on the stereo
system, using the RK-C510HG audio cable (not supplied).
Tips
SLV-ED915PS/TH, ED818ME/SG, ED817TH and ED815PS
• If the other VCR is a monaural type and connected to this VCR’s LINE-2 IN jacks,
connect the audio plug to the AUDIO L (white) jack. The sound is recorded on both
right and left channels. When connecting to the AUDIO R (red) jack, the sound is
recorded only on the right channel.
• You can also use the LINE-1 IN jack instead. If the other VCR is a monaural type,
the sound is recorded only on the channel whose jack is connected to the audio
plug. To record on both right and left channels, connect the audio plugs to the
AUDIO R/L jacks using a VMC-910HG audio/video cable (not supplied).
SLV-ED616ME/MJ/SG and ED515PS
• Use the following audio/video cable according to the type of the other VCR.
Notes
• Make sure you connect the plugs to the jacks of the same colour.
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other VCR,
select the input correctly to prevent a humming noise.
Editing with another VCR (continued)
Jack
LINE-1 IN
LINE-2 IN
If the other VCR is:
Use a cable such as:
Stereo type
VMC-910HG (3-phono to 2-phono)
Monaural type
VMC-710HG/720HG (2-phono to 2-phono)
Stereo type
VMC-810HG (3-phono to 3-phono)
Monaural type
VMC-910HG (3-phono to 2-phono)