All-wheel drive – Saturn 2007 Vue User Manual

Page 353

Advertising
background image

Notice: If the jumper cables are connected or
removed in the wrong order, electrical shorting
may occur and damage the vehicle. The repairs
would not be covered by your warranty. Always
connect and remove the jumper cables in the
correct order, making sure that the cables do
not touch each other or other metal.

A. Heavy, Unpainted Metal Engine Part or

Remote Negative (

) Terminal

B. Good Battery or Remote Positive (+) and

Remote Negative (

) Terminals

C. Dead Battery or Remote Positive (+) Terminal

To disconnect the jumper cables from both
vehicles, do the following:

1. Disconnect the black negative (

) cable from

the vehicle that had the dead battery.

2. Disconnect the black negative (

) cable from

the vehicle with the good battery.

3. Disconnect the red positive (+) cable from the

vehicle with the good battery.

4. Disconnect the red positive (+) cable from the

other vehicle.

5. Return the underhood fuse block cover to its

original position, if applicable.

All-Wheel Drive

If you have an all-wheel-drive vehicle, be sure to
perform the lubricant checks described in this
section. There are two additional systems
that need lubrication.

Jumper Cable Removal

353

Advertising